Alexandre Boudonne
- Total activity 134
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 111
Activity overview
Latest activity by Alexandre Boudonne-
Alexandre Boudonne created an article,
How long does it take to change the frequency over the cloud ?
It depends on the initial frequency. Suppose you move from "1 measure every 3 hours" to "1 measure per hour", the delay would be 12 hours (waiting for downlink config twice a day) + 3 hours (initia...
-
Alexandre Boudonne created an article,
How to change the battery on HummBox RevG devices ?
HummBox RevG are devices with black housing like examples below: HummBox 3in (Multiple sensor transmitter : pressure, soil humidity, ...) HummBox Level(ultrasonic sensor) HuumBox EVC(Electro V...
-
Alexandre Boudonne created an article,
How to enforce a measurement or a reboot on HummBox IP 68 ?
1. Use "SHORT MAGNET" twice to enforce a measurement 2. Use "LONG MAGNET" to reboot (get also the config) and then send a message Magnet inteactions here
-
Alexandre Boudonne created an article,
How to change the measurement frequency ?
In each device setting, you change the frequency Frequency is among : Once changed, the new frequency will be generally taken into account within next 12 hours (see delay details here), unles...
-
Alexandre Boudonne created an article,
Payload decoding for Soil sensor set
There are 2 references for the soil sensors set : Catnip Soil : #19 WaterScout Soil : #50 The sensor set of catnip soil sensor is : 19 This configuration need to be set into the device through a ...
-
Alexandre Boudonne created an article,
What is the battery life ?
Battery autonomy is dependant on measurement frequency and device type. Fixed measurement frequency can be set up from the cloud among Smart frequency mode is increasing battery life by adapting a...
-
Alexandre Boudonne created an article,
How to register an Application on TTN console ?
Procedure to configure TTN network server for HummBox solution Please note that the following data are necessary for the procedure : AppEUI : To be found into your provision file AppKey : To be ...
-
Alexandre Boudonne created an article,
Set up callbacks in Sigfox backend for hummBox platform
To be able to provide the best support, when adding Hummbox devices to your sigfox backend, please : 1. give us access to the device type to following people : alexandre.boudonne@greencityzen.fr, ...
-
Alexandre Boudonne created an article,
Device configuration through downlink message
This article is only used for integrators customer. In order to set up the collection frequency, and the sensorset index, a configuration downlink message must be sent to the device. Within Sigfox ...
-
Alexandre Boudonne created an article,
Payload decoding for Ultrasonic level sensor set
There are 3 references for the ultrasonic level sensors: Ref : 7052 : #16 (cm) Ref : 7360,7369 : #46 (mm) New US sensor (2020) : #75 (mm) New US sensor (2021) : #99 (mm) The sensor set of level...