Francois Hamon
- Activité totale 52
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 0 utilisateur
- Votes 0
- Abonnements 46
Aperçu des activités
Dernière activité effectuée par Francois Hamon-
Francois Hamon a créé un article,
H2S - Meta-données
Le point de 0 ppb pour le H₂S correspond à une valeur de tension non nulle. Cette association est réalisée lors de l'étalonnage en usine. Elle dépend également d'une loi de compensation de températ...
-
Francois Hamon a créé un article,
How to generate a tweet with CO2 alert through TTN network server ?
The gateway to be registered on ttn network (gateway registration on TTN). The hummbox devices to be registered on TTN network (device registration on TTN) Catch the MQTT message flow from a no...
-
Francois Hamon a créé un article,
Comment calibrer le sensor C02 à distance via message downlink
CO2 calibration can be done 3 ways: - manual calibration with device preset settings (fresh air calibration) : use button - manual calibration with customizable setting (X calibration), it needs a ...
-
Francois Hamon a créé un article,
Decodage de payload d'un sensor set Air Indoor & Room monitor
There are 3 references for the air indoors sensors set : Air Indoor THr : #5 Air Indoor THr, CO2: #31 Air Indoor THr, Lumen, PIR, CO2: #56 The sensor set of air indoors THr sensor is : 5 Th...
-
Francois Hamon a créé un article,
Decodage de payload d'un sensor set Air Outdoor
There are 3 references for the air outdoors sensors set : Air Outdoor THr, Rain collector : #41 Air Outdoor THr, Wind Speed Vortex: #49 Air Outdoor Leaf Wetness: #54 Air Outdoor Leaf Wetness, rain...
-
Francois Hamon a créé un article,
Comment rebooter un device depuis le lien descendant (message downlink) ?
The following message should be send from the server side to trigger a reset of the device. This procedure could be helpfull in case of detection of abnormal behavior of the device. Or simply as a...